PEAVEY IRM 8150 Industrial Rackmount Mixer Amp

Item Details:

• Brand: PEAVEY
• Model: IRM 8150
• Type: Industrial Rackmount Mixer Amp
• Specifications:
  • Channel: 
    • Equivalent Input Noise: -114.5 dBV @ 40 dB max Gain
    • Frequency Response (To Speaker Outputs): +1 dB 20 Hz to 20 kHz
    • Distortion (1 kHz): Less than 0.15%
    • Input Impedance:
      • Low Z Bal = 1.7 k ohms
      • Line Input = 13 K ohms
    • High EQ:
      • +12 dB @ 10 Hz Minimum
      • Center detent flat +2 dB
    • Mid EQ:
      • +12 dB @ 600 Hz minimum
      • Center detent +2 dB
    • Low EQ:
      • +12 dB @ 50 Hz minimum
      • Center detent flat +2 dB
    • Nominal Channel Gain:
      • Low Z = 20 dB
      • Line = 0 dB
    • Minimum Channel Gain:
      • Low Z = -69 dB
      • Line = -89 dB
    • Maximum Channel Gain:
      • Low Z = 40 dB
      • Line = 20 dB
    • Nominal Input Level:
      • Low Z = =20 dBV
      • Line = 20 dB
    • Minimum Input Level:
      
      • Low Z = -40 dBV
      • Line = -20 dBV
    • Maximum Input Level:
      • Low Z = +6 dB
      • Line = +26 dB
    • Phantom Power: +48 V DC
  • Graphic Equalizers:
    • Filter Bandwidth: 1 octave
    • Filter Frequencies (ISO Stds.):
      • 63 Hz, 125 Hz, 250 Hz, 1 kHz, 2 kHz, 4 kHz, 8 kHz, 16 kHz
    • Filter Q: 1.57
    • Maximum Boost & Cut: + 6 dB, -12 dB
    • Noise: -100 dBV
    • Distortion (1 kHz): Less than .005%
    • Frequency Response: +1 dB 7 Hz to 40 kHz
    • Input Level:
      • Nom = 0 dBV (1.0 V RMS)
      • Max = +19 dBV (9 V RMS)
    • Output Level:
      • Nom = 0 dBV (1.0 V RMS)
      • Max = +19 dBV (9 V RMS)
    • Input Impedance: 10 K ohms
    • Output Impedance: 100 ohms
    • Master:
      • Gain:
        • Main: = 20 dB
        • Monitor: = 15 dB
        • Tape: = 15 dB
        • Aux: = 15 dB
    • Maximum Output Level:
      • Main: = +18 dBV (8.0 V RMS)
      • Monitor: = +18 dBV (8.0 V RMS)
      • Tape: = +18 dBV (8.0 V RMS)
        
      • Aux: +18 dBV (8.0 V RMS)
    • Nominal Headroom:
      • Main: = 18 dB
      • Monitor: = 18 dB
      • Tape: = 18 dB
      • Aux: = 18 dB
    • Output Impedance:
      • Main: = 100 ohms
      • Monitor: = 100 ohms
      • Tape: = 10 K ohms
      • Aux: = 100 ohms
    • Output Noise:
      • Residual: -100 dBV (Master Level Down)
      • Bus: -94 dBV (Master Nominal, All Channel Level Full CCW, Aux Returns Down)
      • Nominal: -86 dBV (All Controls Nominal, Low Z Input Terminated 150 ohms)
    • Aux Input Impedance: 120 K ohms
    • Aux Input Level:
      • Nom: 0 dBV
      • Max: +7 dBV
      • Min: -15 dBV
    • Tape Input Level:
      • Nom: +4 dBV
      • Max: +11 dBV
      • Min: -10 dBV
  • Power AMP Section:
    • Frequency Response:
      • +0, -1 dB 20 Hz to 20 kHz @ Rated Power (direct out)
      • +0, -1 dB 50 Hz to 20 kHz @ Rated Power (XFMR outputs)
    • Rated Power:
      • Direct Out: 150 watts RMS @ 4 ohms
      • XFMR Outputs:
        • 150 watts RMS @ 8 ohms
        • 150 watts RMS @ 25 V (4 ohms)
        • 150 watts RMS @ 70 V (33 ohms)
        • 1 V RMS Into 600 ohms
      • Intermodulation Distortion:
        • Less than 0.1% (10 mW to rated power 250 Hz & 7 kHz, 4 ohms)
      • Total Harmonic Distortion: Less than 0.1%
      • SPS Dynamic Range: Greated than 26 dB
      • SPS Maximum:
        • Below 0.5% THD for 6 dB overload
        • Blow 1% TGD for 20 dB overload
      • Hum & Noise: -92 dB below 150 watts
      • Slew Rate: 15V/µSec
      • Damping Factor: Greater than 100 @ 1 kHz, 4 ohms
      • Input Sensitivity: 1 V RMS for 150 watts @ 4 ohms
      • Input Impedance: 19 k ohms
      • Power Requirements: 800 watts, 120 V AC, 60 Hz

Conditions:

• Item is used and in good condition
• Item has been tested and functions properly
• Item may have minor scratching and scuffing from normal use
• Item does not include any additional accessories